Drop-in Sink + Drainer Combination

Simmons’ drop-in sink and drainer combinations are manufactured in a single homogeneous molding. This is the undisputed best method of incorporating a drainer board into phenolic worksurfaces without exposing the material core and can be used to easily and inexpensively create a self-contained wet area of high chemical resistance.

Simmons Sinks are widely stocked in black. White, gray slate gray and charcoal are available to order for a small up-charge.

*Note: color swatches provided are a guide only and may not precisely match the color of components supplied by Simmons.

SD15-DI

The SD15-DI drop-in sink and drainer unit is designed to be fitted into a rebated cut out
in the worktop. The surface should be flush with or set slightly below the worktop so that liquids can be washed into the bowl. The integral drainer board is sloped to provide drainage to the sink. The surface of the drainer board is ribbed so as to match the profile of the drainers found on all of Simmons’ standard molded sink and drainer units.

Sinktop Measures: 34″ x 13.5″
Bowl Measures: 16″L x 12″W x  11″D

SD55-DI

The SD55-DI drop-in sink and drainer unit is designed to be fitted into a rebated cut out in the worktop. The surface should be flush with or set slightly below the worktop so that liquids can be washed into the bowl.

Sinktop Measures: 42” x 16.65”
Bowl Measures: 25″L x 15″W x  10″D

Skip to content